2 MP High Definition CCTV Camera Bullet Type High Reliabable 3.6 - 10 MM Length AIA-1 manufacturer from China Golden Shield Security Center Ltd.

2 MP High Definition CCTV Camera Bullet Type High Reliabable 3.6 - 10 MM Length

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

2 MP High Definition CCTV Camera Bullet Type High Reliabable 3.6 - 10 MM Length

<span styl

2 MP High Definition CCTV Camera Bullet Type High Reliabable 3.6 - 10 MM Length

Description:

using high-performance sensor, image clarity, and delicate;
Support IR-CUT filter switching, to achieve day and night monitoring;
analog HD 1080P @ AHD video output;
the transmission distance over 500 meters;
need access to the back-end AHD DVR;
support for ultra-low-light;
support for automatic electronic shutter function, adapt to different monitoring environment;
meets IP66 waterproof design, high reliability;

Product details:

Model	AHC-EQB5120PL-H-IR3
Sensor	1/2.7” OV2710 CMOS
Signal System	1080P@AHD
Effective Pixels	PAL:1920*1080
Minimum Illumination	Color: 0.1Lux @(F1.2,AGC ON),0 LUX with IR
Minimum Illumination	B&W: 0.01 Lux @ (F1.2,AGC ON),0 LUX with IR
Shutter	1/50(1/60)s to 1/10,000s
Day and Night Function	Support IR-CUT
Lens Type	Manual zoom lens 3~10.5mm
Lens Parameters	M14
Video output	1Vp-p Composite Output(75Ω/BNC)
Temperature and Humidity	10 ~ 60, humidity is less than 90% (no condensation)
Power supply	DC12V±10%
Consumption	6W MAX
Protection class	IP66
Dimension	80mm*300mm
Weight	700g

Applications:

Family, the school, Bank, Factory, parking lot, Square, Shopping center, airport, bus station, supermarket, Prison, Office buildings, meeting, Part, Chemical

CAUTION FOR SAFE OPERATION:

1. Be sure of power supply at DC 12V

2. Connect cables according to instruction, wrong connection may cause malfunction and /or damage the camera.

3. Do not allow the camera to be subjected to strong impacts or shocks the camera could be damaged by improper handing or storage.

4. Do not install at extreme warm or cold place. (Recommended operation : -10ºC-50ºC)

5. Never attempt to disassemble or modify the camera

6. If an abnormality should happen to occur, immediately contact us